# -*- coding: utf-8 -*- """生成 D:\\ACP\\测试项\\输出电压范围测试.ACP""" import json import uuid CT_TYPE = "System.Threading.CancellationToken, System.Private.CoreLib, Version=8.0.0.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e" INT_TYPE = "System.Int32, System.Private.CoreLib, Version=8.0.0.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e" DOUBLE_TYPE = "System.Double, System.Private.CoreLib, Version=8.0.0.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e" STRING_TYPE = "System.String, System.Private.CoreLib, Version=8.0.0.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e" ENUM_LOAD_MODE = "DeviceCommand.Devices.S7200负载模式_枚举, DeviceCommand, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" ZERO_GUID = "00000000-0000-0000-0000-000000000000" def guid(): return str(uuid.uuid4()) def param(name, ptype, value=None, use_var=False, var_name=None, var_id=None): return { "ID": guid(), "IsVisible": True, "IsEditable": True, "Name": name, "Type": ptype, "Category": 0, "Value": value, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": use_var, "VariableName": var_name, "VariableID": var_id, } def ct_param(): return param("ct", CT_TYPE) def method_step(index, name, full_name, method_name, params): return { "ID": guid(), "IsUsed": True, "Index": index, "Name": name, "StepType": "方法", "Method": { "Name": method_name, "FullName": full_name, "Parameters": params + [ct_param()], }, "SubProgram": None, "LoopCount": None, "LoopStartStepId": None, "OKExpression": None, "GotoSettingString": "", "OKGotoStepID": ZERO_GUID, "NGGotoStepID": ZERO_GUID, "Description": None, } def chroma_step(index, name, method_name, params): return method_step(index, name, "DeviceCommand.Devices.Chroma61800", method_name, params) def s7200_step(index, name, method_name, params): return method_step(index, name, "DeviceCommand.Devices.S7200", method_name, params) def pw8001_step(index, name, method_name, params): return method_step(index, name, "DeviceCommand.Device.PW8001", method_name, params) def delay_step(index, name, ms=None, var_name=None, var_id=None): if var_name and var_id: return method_step(index, name, "Command.Delay", "Delay_ms", [param("millisecond", INT_TYPE, use_var=True, var_name=var_name, var_id=var_id)]) else: return method_step(index, name, "Command.Delay", "Delay_ms", [param("millisecond", INT_TYPE, str(ms))]) # 程序变量 VAR_RATED_VOLT = guid() # 额定输入电压 VAR_FREQ = guid() # 额定频率 VAR_VOLT_LOWER = guid() # OBC输出电压下限 VAR_VOLT_UPPER = guid() # OBC输出电压上限 VAR_LOAD_LOWER = guid() # 达到下限电压的负载电流 VAR_LOAD_UPPER = guid() # 达到上限电压的负载电流 VAR_PW_CHANNEL = guid() # 功率分析仪通道号 VAR_HOLD_TIME = 60000 # 1min = 60000ms (固定值) program_params = [ # 标准系统参数（Category=2） {"ID": guid(), "IsVisible": True, "IsEditable": True, "Name": "台架序号", "Type": INT_TYPE, "Category": 2, "Value": 1, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": guid(), "IsVisible": True, "IsEditable": True, "Name": "CAN通道", "Type": INT_TYPE, "Category": 2, "Value": 0, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": guid(), "IsVisible": True, "IsEditable": True, "Name": "示波器通道1", "Type": INT_TYPE, "Category": 2, "Value": 0, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": guid(), "IsVisible": True, "IsEditable": True, "Name": "示波器通道2", "Type": INT_TYPE, "Category": 2, "Value": 0, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": guid(), "IsVisible": True, "IsEditable": True, "Name": "功率分析仪通道1", "Type": INT_TYPE, "Category": 2, "Value": 0, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": guid(), "IsVisible": True, "IsEditable": True, "Name": "功率分析仪通道2", "Type": INT_TYPE, "Category": 2, "Value": 0, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, # 测试项可调变量（Category=0）- 用户手动填值 {"ID": VAR_RATED_VOLT, "IsVisible": True, "IsEditable": True, "Name": "额定输入电压", "Type": DOUBLE_TYPE, "Category": 0, "Value": None, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": VAR_FREQ, "IsVisible": True, "IsEditable": True, "Name": "额定频率", "Type": DOUBLE_TYPE, "Category": 0, "Value": None, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": VAR_VOLT_LOWER, "IsVisible": True, "IsEditable": True, "Name": "OBC输出电压下限", "Type": DOUBLE_TYPE, "Category": 0, "Value": None, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": VAR_VOLT_UPPER, "IsVisible": True, "IsEditable": True, "Name": "OBC输出电压上限", "Type": DOUBLE_TYPE, "Category": 0, "Value": None, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": VAR_LOAD_LOWER, "IsVisible": True, "IsEditable": True, "Name": "达到下限电压的负载电流", "Type": DOUBLE_TYPE, "Category": 0, "Value": None, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": VAR_LOAD_UPPER, "IsVisible": True, "IsEditable": True, "Name": "达到上限电压的负载电流", "Type": DOUBLE_TYPE, "Category": 0, "Value": None, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, {"ID": VAR_PW_CHANNEL, "IsVisible": True, "IsEditable": True, "Name": "功率分析仪通道号", "Type": INT_TYPE, "Category": 0, "Value": None, "LowerLimit": None, "UpperLimit": None, "Result": True, "IsUseVar": False, "VariableName": None, "VariableID": None}, ] steps = [] # ---- 一、功率分析仪初始化 ---- steps.append(pw8001_step(1, "设置测试模式WIDE", "设置测试模式_WIDE", [])) steps.append(pw8001_step(2, "设置同步源U1", "设置同步源", [param("源", STRING_TYPE, "U1")])) # ---- 二、交流源设置额定输入 ---- steps.append(chroma_step(3, "初始化三相List模式(单次循环)", "初始化三相List模式", [param("loopCount", INT_TYPE, "1")])) steps.append(chroma_step(4, "配置List起始频率(额定)", "配置List起始频率Async", [param("step1", DOUBLE_TYPE, use_var=True, var_name="额定频率", var_id=VAR_FREQ), param("step2", DOUBLE_TYPE, use_var=True, var_name="额定频率", var_id=VAR_FREQ), param("step3", DOUBLE_TYPE, use_var=True, var_name="额定频率", var_id=VAR_FREQ)])) steps.append(chroma_step(5, "配置List结束频率(额定)", "配置List结束频率Async", [param("step1", DOUBLE_TYPE, use_var=True, var_name="额定频率", var_id=VAR_FREQ), param("step2", DOUBLE_TYPE, use_var=True, var_name="额定频率", var_id=VAR_FREQ), param("step3", DOUBLE_TYPE, use_var=True, var_name="额定频率", var_id=VAR_FREQ)])) steps.append(chroma_step(6, "配置List交流起始电压(额定)", "配置List交流起始电压Async", [param("step1", DOUBLE_TYPE, use_var=True, var_name="额定输入电压", var_id=VAR_RATED_VOLT), param("step2", DOUBLE_TYPE, use_var=True, var_name="额定输入电压", var_id=VAR_RATED_VOLT), param("step3", DOUBLE_TYPE, use_var=True, var_name="额定输入电压", var_id=VAR_RATED_VOLT)])) steps.append(chroma_step(7, "配置List交流结束电压(额定)", "配置List交流结束电压Async", [param("step1", DOUBLE_TYPE, use_var=True, var_name="额定输入电压", var_id=VAR_RATED_VOLT), param("step2", DOUBLE_TYPE, use_var=True, var_name="额定输入电压", var_id=VAR_RATED_VOLT), param("step3", DOUBLE_TYPE, use_var=True, var_name="额定输入电压", var_id=VAR_RATED_VOLT)])) steps.append(chroma_step(8, "配置List执行时间", "配置List执行时间Async", [param("step1", DOUBLE_TYPE, 100.0), param("step2", DOUBLE_TYPE, 100.0), param("step3", DOUBLE_TYPE, 100.0)])) steps.append(chroma_step(9, "启动List输出(额定输入)", "启动List输出", [])) steps.append(delay_step(10, "等待OBC启动", 5000)) # ---- 三、负载(S7200)初始化 ---- steps.append(s7200_step(11, "设置为远程模式", "设置为远程模式", [])) steps.append(s7200_step(12, "设置负载工作模式CC", "设置负载工作模式", [param("模式", ENUM_LOAD_MODE, 0)])) # CC=0 # ---- 四、调节负载使输出电压为下限值 ---- steps.append(s7200_step(13, "设置CC模式电流(达到下限电压)", "设置CC模式电流", [param("电流", DOUBLE_TYPE, use_var=True, var_name="达到下限电压的负载电流", var_id=VAR_LOAD_LOWER)])) steps.append(s7200_step(14, "打开通道(加载至下限电压)", "设置通道开关", [param("开关", "System.Boolean, System.Private.CoreLib, Version=8.0.0.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e", True)])) steps.append(delay_step(15, "等待输出电压稳定在下限", 3000)) steps.append(pw8001_step(16, "测量下限电压点输出电压", "查询电压_不含变比", [param("通道号", INT_TYPE, use_var=True, var_name="功率分析仪通道号", var_id=VAR_PW_CHANNEL)])) steps.append(delay_step(17, "下限电压持续运行1min", VAR_HOLD_TIME)) steps.append(pw8001_step(18, "记录下限电压最大值", "查询电压_不含变比", [param("通道号", INT_TYPE, use_var=True, var_name="功率分析仪通道号", var_id=VAR_PW_CHANNEL)])) # ---- 五、调节负载使输出电压为上限值 ---- steps.append(s7200_step(19, "设置CC模式电流(达到上限电压)", "设置CC模式电流", [param("电流", DOUBLE_TYPE, use_var=True, var_name="达到上限电压的负载电流", var_id=VAR_LOAD_UPPER)])) steps.append(delay_step(20, "等待输出电压稳定在上限", 3000)) steps.append(pw8001_step(21, "测量上限电压点输出电压", "查询电压_不含变比", [param("通道号", INT_TYPE, use_var=True, var_name="功率分析仪通道号", var_id=VAR_PW_CHANNEL)])) steps.append(delay_step(22, "上限电压持续运行1min", VAR_HOLD_TIME)) steps.append(pw8001_step(23, "记录上限电压最大值", "查询电压_不含变比", [param("通道号", INT_TYPE, use_var=True, var_name="功率分析仪通道号", var_id=VAR_PW_CHANNEL)])) # ---- 六、收尾 ---- steps.append(s7200_step(24, "关闭负载通道", "设置通道开关", [param("开关", "System.Boolean, System.Private.CoreLib, Version=8.0.0.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e", False)])) steps.append(chroma_step(25, "停止输出(电压归零)", "配置List交流起始电压Async", [param("step1", DOUBLE_TYPE, 0.0), param("step2", DOUBLE_TYPE, 0.0), param("step3", DOUBLE_TYPE, 0.0)])) steps.append(chroma_step(26, "配置List交流结束电压(0V)", "配置List交流结束电压Async", [param("step1", DOUBLE_TYPE, 0.0), param("step2", DOUBLE_TYPE, 0.0), param("step3", DOUBLE_TYPE, 0.0)])) steps.append(pw8001_step(27, "清除状态", "清除状态", [])) program = { "ID": guid(), "StepCollection": steps, "ErrorStepCollection": [], "Parameters": program_params, } out_path = r"D:\ACP\测试项\输出电压范围测试.ACP" with open(out_path, "w", encoding="utf-8") as f: json.dump(program, f, ensure_ascii=False, indent=2) # 校验 with open(out_path, encoding="utf-8") as f: data = json.load(f) print(f"已生成: {out_path}") print(f"步骤数: {len(data['StepCollection'])}, 参数数: {len(data['Parameters'])}") print("\n需要手动填写的变量参数：") for p in data["Parameters"]: if p["Category"] == 0: print(f" - {p['Name']} ({p['Type'].split(',')[0].split('.')[-1]})") print("\n步骤流程：") for s in data["StepCollection"]: print(f" {s['Index']:>2}. {s['Name']}") print("\n测试点：") print(" - OBC输出电压下限：调节负载使输出电压达到下限，持续运行1min") print(" - OBC输出电压上限：调节负载使输出电压达到上限，持续运行1min") print("\n注意：需要用户根据OBC规格填写输出电压上下限及对应的负载电流值")